Technical Guide for the Installation and Maintenance of 900×1800 mm Porcelain Tile Flooring

The correct use and installation of porcelain tile flooring 900×1800 mm matte finish It guarantees maximum product performance and a long service life in any application. Below, we present a complete installation and maintenance guide, based on the manufacturer's recommendations and international technical standards.

Recommendations before installation

• Verify that the model, batch number and dimensions make sure the pieces match up before installing them.
• Use only products from the same batch to maintain visual uniformity in color, tone and finish.
• Properly prepare the base surface. It must be level, clean and free of moisture or dust.

Porcelain tile installation instructions

1. Adequate adhesion:

Use homogeneous cement mortar or ceramic adhesivedepending on the type of surface. For walls, the following is recommended: dry decorationwithout hitting the tile directly.

2. Uniform placement direction:

Follow the arrows or pattern on the back of the piece to achieve proper alignment. This is key when the surface design has a directional texture.

3. Mortar joints:

Leave joints between 3 and 5 mm between each tile to allow for grouting and to prevent detachment due to pressure.

4. Grouting time:

It must be done within the first 24 hours after installation to ensure structural cohesion.

5. Manipulation of internal angles:

The internal angles must follow a termination rounded (not straight) to prevent cracks due to structural tension.

Porcelain tile maintenance

• Post-installation cleaning:

Remove any remaining cement or mortar before it hardens. Do not use abrasive tools.

• Prohibited products:

Do not use chlorofluoric acid nor other corrosive agents that may damage the surface of the porcelain tile.

• Daily cleaning:

Use dry or slightly damp mopUse neutral cleaners. Adding a dust repellent periodically helps maintain its matte finish.

• Protection during subsequent works:

If work continues in the area after the flooring is installed, cover the porcelain tile with a temporary protective layer to avoid scratches or fractures.

Advantages of a correct installation

• Greater durability and traffic resistance
• Visual stability without displacement
• Constant anti-slip safety
• Professional and homogeneous aesthetic
• Reduced need for corrective maintenance